TEN 3-2422N

DC/DC Converter TEN 3N Series, 3 Watt • • Wide 2:1 input range • Extended operating temperature range –40°C to +85°C Input filter to meet EN 55032, class A and FCC, level A without external components • Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) • • High reliability, MTBF >1.0 Mio. h 3-year product warranty UL 62368-1 IEC 62368-1 The TEN 3N Series is a drop in replacement of the prevalent TEN 3 Series. The up-to date design enables a cost reduction without any compromise to reliability and function. They come with an internal filter to meet EN55032 class A without external components. Increased EMC immunity and extended operating temperature range of –40°C to +85°C make these converters an ideal solution for cost critical but demanding applications. With the standard pinning it is a drop in replacement for common 3 Watt converters in DIP24 package. Models Order Code Input Voltage Range TEN 3-0510N TEN 3-0511N TEN 3-0512N TEN 3-0513N TEN 3-0515N TEN 3-0521N TEN 3-0522N TEN 3-0523N TEN 3-1210N TEN 3-1211N TEN 3-1212N TEN 3-1213N TEN 3-1215N TEN 3-1221N TEN 3-1222N TEN 3-1223N TEN 3-2410N TEN 3-2411N TEN 3-2412N TEN 3-2413N TEN 3-2415N TEN 3-2421N TEN 3-2422N TEN 3-2423N TEN 3-4810N TEN 3-4811N TEN 3-4812N TEN 3-4813N TEN 3-4815N TEN 3-4821N TEN 3-4822N TEN 3-4823N 4.5 - 9 VDC (5 VDC nom.) 9 - 18 VDC (12 VDC nom.) 18 - 36 VDC (24 VDC nom.) 36 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 750 mA 600 mA 250 mA 200 mA 125 mA 250 mA 125 mA 100 mA 750 mA 600 mA 250 mA 200 mA 125 mA 250 mA 125 mA 100 mA 750 mA 600 mA 250 mA 200 mA 125 mA 250 mA 125 mA 100 mA 750 mA 600 mA 250 mA 200 mA 125 mA 250 mA 125 mA 100 mA Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 250 mA 125 mA 100 mA –5 VDC –12 VDC –15 VDC 250 mA 125 mA 100 mA –5 VDC –12 VDC –15 VDC 250 mA 125 mA 100 mA –5 VDC –12 VDC –15 VDC 250 mA 125 mA 100 mA typ. 77 % 80 % 82 % 82 % 81 % 80 % 82 % 82 % 79 % 81 % 85 % 85 % 84 % 80 % 84 % 84 % 79 % 81 % 85 % 85 % 84 % 80 % 84 % 84 % 79 % 81 % 85 % 85 % 84 % 80 % 84 % 84 % Options Suffix -HI - 5 Vin models (except 3.3 Vout) with high iso. (3000 VDC), other Vin: www.tracopower.com/overview/ten3win www.tracopower.com September 20, 2023 Page 1 / 4 TEN 3N Series, 3 Watt Input Specifications Input Current - At no load 5 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Input Filter Short Circuit Input Power 65 mA typ. 35 mA typ. 20 mA typ. 15 mA typ. 700 mA typ. 300 mA typ. 150 mA typ. 75 mA typ. 11 VDC max. (1 s max.) 25 VDC max. (1 s max.) 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 4 VDC max. 8.5 VDC max. 17.5 VDC max. 35.5 VDC max. 100 mAp-p typ. 30 mAp-p typ. 15 mAp-p typ. 10 mAp-p typ. (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type 2 W max. Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise Capacitive Load - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output - dual output ±2% max. 1% max. 1% max. 1% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 2% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Short Circuit Protection Overload Protection Output Current Limitation Transient Response - Response Deviation - Response Time 70 mVp-p max. 680 µF max. 470 µF max. 330 µF max. 220 µF max. 100 µF max. 220 / 220 µF max. 150 / 150 µF max. 100 / 100 µF max. Not required ±0.02 %/K max. Continuous, Automatic recovery Foldback Mode 120% min. of Iout max. 150% typ. of Iout max. 3% typ. / 5% max. (75% to 100% Load Step) 300 µs typ. / 500 µs max. (75% to 100% Load Step) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TEN 3N Series, 3 Watt Safety Specifications Safety Standards CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten3n PD 3 Not mains connected - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EMS Immunity - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge - Conducted RF Disturbances EN 55032 class A (internal filter) EN 55032 class A (internal filter) EN 55024 (IT Equipment) EN 55035 (Multimedia) Air: EN 61000-4-2, ±8 kV, perf. criteria A Contact: EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A Ext. input component: 200 µF, 100 V, ESR 48 mΩ EN 61000-4-6, 10 Vrms, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage - Input to Output, 60 s Isolation Resistance Isolation Capacitance Reliability Washing Process Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF 95% max. (non condensing) –40°C to +85°C +100°C max. –55°C to +125°C 3.3 %/K above 70°C See application note: www.tracopower.com/overview/ten3n Natural convection (20 LFM) 6'000 m max. 80 kHz min. (PFM) Functional Insulation 1'500 VDC (Standard models) 3'000 VDC (Suffix -HI) 1'800 VDC 1'000 MΩ min. 300 pF max. 1'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2.5 µm min.) Gold (75 - 125 nm), glossy Plastic Case PCB Mount THD (Through-Hole Device) DIP24 Lead-Free Wave Soldering 260°C / 10 s max. 12.8 g All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TEN 3N Series, 3 Watt Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) dabea3dc-e870-4d0b-8ad2-5c658ef22c35 - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten3n Outline Dimensions Pinout 9 11 Pin Bottom view Ø0.5 (Ø0.02) 23 22 16 20.3 (0.80) 3 15.22 (0.599) 2 14 Single Dual 2 in (GND) in (GND) 3 in (GND) in (GND) 9 No pin 11 NC 14 +Vout 2.54 (0.100) 16 Common out out +Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) NC: Not connected 4.5 2.54 15.24 (0.600) (0.100) 5.08 4.5 (0.200) (0.18) (0.18) 10.2 (0.40) 31.8 (1.25) Dimensions in mm (inch) Tolerances x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) Pin tolerances: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4